Siemens AC75 Benutzerhandbuch
AC75 AT Command Set
10.3 AT^SISS
s
AC75_ATC_V01.002
Page 263 of 569
10/30/06
Confidential / Released
10.3
AT^SISS Internet Service Setup Profile
serves to set up the necessary parameters in the Internet service profiles. Any service profile can then
be used to control a data link in conjunction with
,
,
and
The
read command requests the current settings of all Internet service profiles. One line is issued for
every possible parameter of a given
"srvType" value.
The
write command specifies the parameters for a service profile identified by
first the type of Internet service needs to be selected via
applicability of all other
"srvType" of an existing service profile will reset all
default values to suit the
new "srvType". An exception is the
"srvType" and is not reset when "srvType" changes.
To change the settings the write command needs to be executed for each single
are volatile.
The list below shows which
parameters apply to each Internet service and which of them are
mandatory or optional.
Table 10.2: Applicability of
values
Mandatory or optional
Socket service
"srvType"
"srvType"
mandatory
"conId"
mandatory
"alphabet"
optional
"address"
mandatory
"tcpMR"
optional
"tcpOT"
optional
FTP service
"srvType"
"srvType"
mandatory
"conId"
mandatory
"alphabet"
optional
"address"
mandatory
"tcpMR"
optional
"tcpOT"
optional
HTTP service
"srvType"
"srvType"
mandatory
"conId"
mandatory
"alphabet"
optional
"address"
mandatory
"user"
optional
"password"
optional
"hcContent"
optional
"hcContLen"
optional