Siemens AC75 Benutzerhandbuch

s

AC75_ATC_V01.002

Page 301 of 569

10/30/06

Confidential / Released

First set up a connection profile as explained in Section 

 or Section 

. Enter at least all parameters

which are mandatory for the connection profile. 

Configure the service profile 1 for FTP: 

Make an FTP connection: 

First set up a connection profile as explained in Section 

 or Section 

. Enter at least all parameters

which are mandatory for a CSD or GPRS profile. The example uses the connection profile ID 1 and the service

profile ID 9. 

^SISR: 1, 50

50 bytes are now available.

hardware

inttest

software

support

systemtest

OK

^SISR: 1, 2

Data transfer finished. No more data available. The

connection to the FTP server is closed.

at^sisc=1

Close the service.

OK

at^siss=1,srvType,ftp

Select service type FTP.

OK

at^siss=1,conId,0

Select connection profile 0.

OK

at^siss=1,address,"ftpput://
myname:mypasswd@192.168.1.2/upload/exam-
ple.bin;type=i"

Specify FTP address with individual user name and

password. The file "example.bin" shall be created on

the FTP server. 

OK

at^siso=1

Open the service.

OK

Bearer is established, service is getting started.

^SISW: 1, 1

FTP service is ready for upload.

at^sisw=1,100

Client requests to send 100 bytes.

^SISW: 1,100,100

The write command response confirms that 100

bytes must be transferred now.

0123456789012345678901234567890123456789012
3456789012345678901234567890123456789012345
67890123456789

User data is transferred. 

OK

^SISW: 1, 1

URC indicates that the FTP service is ready to trans-

fer more data. Data of the last 

 command is

transferred to the remote host.

at^sisw=1,0,1

No more data available. The file "example.bin" shall

be closed on the FTP server.

OK

^SISW: 1, 2

Data transfer finished successfully. The connection

to the FTP server is closed.

at^sisc=1

Close the FTP service.

at^siss=9,srvType,"Smtp"

Select service type SMTP.

OK