Siemens AC75 Benutzerhandbuch

s

AC75_ATC_V01.002

Page 392 of 569

10/30/06

Confidential / Released

Sending a concatenated message is similar to sending a "normal" message, except that each segment of the

concatenated message must be identified by the additional parameters 

. To send all

segments of the message one by one, the 

 write command must be executed for each segment. 

The write command transmits one segment of a concatenated short message from TE to network (SMS-SUB-

MIT).

After invoking the write command wait for the prompt ">" and then start to write the message. To send the mes-

sage simply enter 

. After the prompt a timer will be started to observe the input.

To abort sending use 

. Abortion is acknowledged with "OK", though the message will not be sent.

The message reference 

 is returned to the TE on successful message delivery. The value can be used to

identify the message in a delivery status report provided as an unsolicited result code. 

• See notes provided for 

• Command is only available if 

Test Command

AT^SCMS=?

Response(s)

OK

Write Command

Command syntax for text mode (see 

[, 

], 

 Text can be entered 

/

Response(s)

[, 

OK
If sending fails
ERROR

+CMS ERROR

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

SIEMENS