Roberts Radio 63I Benutzerhandbuch

1.  Carefully extend the telescopic aerial and press the On/Standby button to 

switch on your radio.

2. Press 

the 

Radio button as needed to select FM radio mode.

3.  Press  the Menu Up button (on the radio) or the Right button (on the remote 

control) and then the Auto  button on the remote control.  The displayed 
frequency will increase. Your radio will scan up the FM band from the currently 
displayed frequency and will stop scanning when it fi nds a station of suffi cient 
strength. 

4.  The display will show the frequency of the signal which has been found. If 

RDS information is available, after a few seconds the display will show the 
radio station name. 

 

If you only hear hiss or interference, simply press the Auto button to scan 
further. Your radio may have found a spurious interference signal.

5.  To fi nd more FM stations press the the Auto button (on the remote control) 

to repeat the scan operation. To scan down in frequency, press the Menu 
Down button (on the radio) or the Left button (on the remote control) and then 
the Auto button. Your radio will scan down the FM band from the currently 
displayed frequency and will stop scanning when it fi nds a signal of suffi cient 
strength.

6.  Alternatively press and hold the Menu Up  on the radio to scan up in frequency 

or the Menu Down button to scan down the FM band. Alternatively press 
and hold the Left or Right buttons on the remote control.

7.  When the end of the waveband is reached your radio will recommence tuning 

from the opposite end of the waveband. Use the Volume buttons to adjust 
the sound level as needed.

2

5,6

3-6

3-5

3-6

5,6