RGB Spectrum DGY 201 Benutzerhandbuch

. . . . .

. . . . . . . . . 

A summary of DGy 201 image commands is listed below. 

Sets brightness value of the analog RGB input or optional composite video 

input.

Sets contrast value of the analog RGB input or optional composite video input

Sets hue value of the optional composite video input.

Sets the saturation (color contrast) value of the optional composite video input.

The table below lists all DGy 201 image commands, their arguments and 
detailed descriptions.

TiMingLISTLOAD

<100 ...160> <name> 

<hfp> <hs> <hbp> 

<hact> <vfp> <vs> 

<vbp> <vact> <hfreq> 

<sync> <hpol> <vpol> 

<il>

This command is used to create and save a user 

timing set to the timing list. 

User defined entries may be saved to the list using 

timing list slots 100 - 160 (Timing slots 1 - 99 are 

reserved for factory defined timing settings). 
The name parameter is a name that is used to 

identify the timing set (for example mytiming3).
hfp - width of the horizontal front porch (pixels)
hs - width of the horizontal sync pulse (pixels)
hbp - width of horizontal back porch (pixels)
hact - width of the active picture area (pixels)
vfp - width of the vertical front porch (pixels)
vs - width of the vertical sync pulse (pixels)
vbp - width of vertical back porch (pixels)
vact - height of the active picture area (pixels)
hfreq - horizontal frequency (Hz)
sync - type of sync signal (analog 3, 4 or 5 wire)
hpol - polarity of horizontal sync pulse (0=negative)
vpol - polarity of vertical sync pulse (0= negative)
il - interlace (0 = non interlace, 1 = interlace)