RGB Spectrum DGY 201 Benutzerhandbuch
C O M M A N D L I N E I N T E R F A C E
Command Summary
350-8697
DGy Model 201 User Guide
124
. . . . .
IPSubNET
ddd.ddd.ddd.ddd
Sets the system Subnet Mask.
Use the
Use the
command to reboot the unit
to activate the new IP subnet mask.
Factory default: 255.255.255.000
Factory default: 255.255.255.000
IPGateWay
ddd.ddd.ddd.ddd
Sets the system default gateway.
Use the
Use the
command to reboot the unit
to activate the new IP gateway.
MACADDRess
(none)
Reports the physical Ethernet (Media Access
Controller) address.
RestoreFactoryDefaults
(none)
Restores all user settings to their factory default
values.
SYStemReSet
(none)
Causes DGy to reboot. This command allows the
system firmware to be restarted without having to
use the front panel power switch.
TestPattern
<CBAR | BOX |
RAMP | PRBS |
GRATE | OFF>
This command selects which internal Test Pattern
is displayed or turns the test pattern generator off.
Test patterns include:
CBAR - 100% color bars
BOX - a box indicating the extent of the output
Test patterns include:
CBAR - 100% color bars
BOX - a box indicating the extent of the output
image
RAMP - a horizontal luminance ramp
PRBS - a test sequence for the DVI output
GRATE - an fs/2 vertical grate
Factory default: OFF
RAMP - a horizontal luminance ramp
PRBS - a test sequence for the DVI output
GRATE - an fs/2 vertical grate
Factory default: OFF
UpdateFirmWare
(none)
This command updates the firmware for the
DGy.The firmware file must be transferred to the
DGy 201 using FTP prior to using this command.
for more details.
Table 6-15.
Miscellaneous Commands (Continued)
Command
Arguments
Description