RGB Spectrum DGY 201 Benutzerhandbuch
TE C H N I C A L S P E C I F I C A T I O N S
General Specifications
350-8697
DGy Model 201 User Guide
131
. . . . .
CONTROL
. . . . . . . . .
SPECIFICATIONS
The table below lists DGy 201 control specifications:
Table A-8.
Control Specifications
Parameter
Specification
Control Protocol
DGy 201
Control is accomplished by use of the
DGy 201
ASCII
based command set. This command set may be used with any of
the control ports listed below. (see the “
in Chapter 6 for details).
Ethernet
10/100 BASE-T ethernet port.
•
Supports control of the full set of
DGy 201
commands
over a network connection using a Telnet server/client
architecture.
•
Internal
DGy 201
web server provides the Web Control
Panel (WCP) a graphical user interface used with a
standard web browser.
•
The
DGy 201
Ethernet port connector type is a standard
RJ45 modular connector (see the “
”
on page 136)
RS-232 Port
DGy 201
commands can be sent through the RS-232 port to
control the system.
•
The RS-232 port transfers commands using the
asynchronous serial protocol at 115200, 57600, 38400,
19200 or 9600 baud.
•
The port is configured as DCE and can handle full duplex
transfer.
•
Support for hardware and software handshaking is
provided.
•
The
DGy 201
RS-232 port connector type is a 9-pin sub
miniature D connector (see the “
”
section on page 127 for details).