RGB Spectrum DGY 201 Benutzerhandbuch

. . . . .

•

Rack mount the unit from the front rack ears using four rack 
screws (not supplied). Rack threads may be metric or otherwise 
— depending upon the rack type. 

•

Install the lower of the two mounting holes first. 

Do not use the DGy 201 as a shelf to support other 
pieces of equipment. If you do, the rack ears and 
mounting screws may be damaged.

•

The DGy 201 is provided with a rear rack bracket and arm to 
support the rear of the chassis. It is recommended that you use 
the bracket to provide additional stability. 

•

Attach the rear brackets to the rack adapter at the rear of your 
chassis.

•

Slide an arm through the slot on the rack adapter and attach the 
arm to the chassis.

•

Attach the arm to the rear bracket by means of the fasteners 
located in the arms.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The figure below illustrates a front panel view of the DGy 201.

Descriptions of each control and indicator are provided below:

AC Power Switch

Use the AC Power Switch to turn the DGy 201 on and off. 
When the unit is on, the switch is illuminated. 

NOTE: When you turn the power off from the front panel, the 
DGy 201 first closes any open files on the disk before 
completing power down. This delay is normal and the power 
indicator will stay lit during this interval. Do not turn off the DGy 
201 by disconnecting the power cord, as this may result in 
corruption of data on the disk.