RGB Spectrum DGY 201 Benutzerhandbuch

. . . . .

•

In the Input section:

~

With nothing checked, only video is recorded.

~

Check Audio to record audio input signals together with 
the video.

•

In the Record Settings section:

~

Use the pull-down Quality menu to set the desired 
recording quality, from High to Low. When set to High 
the Record Bit Rate is set to 1.5 bits per pixel. For most 
applications the Medium setting is recommended 
(factory default). 

The Medium setting provides compression of 1.0 bits 
per pixel (compression ratio 24:1) . 

~

Check Set to Maximum to record at the maximum 
frame rate allowable for the selected input resolution. 
Uncheck the box to manually set the frame rate with the 
up/down selector.

If you select a frame rate that exceeds the maximum 
value for the current input resolution and quality setting, 
DGy 201 will record at the maximum frame rate 
compatible with the quality setting and input resolution 
currently selected.

•

In the Storage Mode section:

~

Click in the “Overwrite when full”check box to activate 
the record overwrite feature. When this box is checked, 
the DGy 201 will overwrite old recordings when the disk 
is full.

~

Check “Sound buzzer when full” to alert you with an 
audible buzzer and flashing “full” indicator on the DGy 
201 front panel when the selected disk reaches the 
threshold level set in the “% full” entry box. 

~

If the buzzer sounds, click Reset to silence the buzzer. 

•

A check box is provided at the bottom of the tab to enable or 
disable the automatic naming of clips.

~

Check Enable clip auto naming to automatically 
create and name new clips when the Record button is