RGB Spectrum DGY 201 Benutzerhandbuch

. . . . .

S

Example:

If the IP address of the Network drive is 192.168.1.59, 
and the storage area on the drive has been set up as 
usr/dgy, enter the following into the Mount Network 
Drive address line:

192.168.1.59:/usr/dgy

Click the Mount button

If the remote drive is found it will be displayed with the other 
drives in the left pane of the Clip Browser and designated as 
“/remot”.

You can play a recording back from either the removable drive, optional 
fixed drive or remote drive using the optional NFS mount option.

If the Clip Browser is not open then open it from the WCP 
Player Screen by clicking in the Clip Path section (see “Clip 
Browser Menu” on page 39)

Use the left pane of the Browser (Figure 3-7) to navigate to the 
drive and folder that contains that clip that you wish to play. 

Note that the removable drive is named /remov and the remote 
drive (NFS) is named /remot. Be sure not to confuse the names.

Use the following steps to play back a clip with DGy 201.

If a clip was just recorded on the Player Screen, simply click the 
Play button to play back the same clip. Click Pause or Stop as 
required.

To play back a different clip, click the Clip Name label to display 
the Clip Browser Menu.

In the Clip Directory section, highlight the clip that you want to 
play back and click Select. The clip is transferred to the Clip 
Name Field in the Player Screen.

Click on the Player Screen.