Primera Technology Bravo Disc Publisher Automated Optical Disc Duplication & Printing System SE Benutzerhandbuch

6 Getting Started

OVERVIEW OF OPERATION

Your new Publisher is an automated, precision device intended

for continuous-duty publishing of discs. The following is a

description of the complete process of duplicating and printing

a CD/DVD job on your Publisher:
1. Up to 20 blank discs may be loaded at one time into the

Input Bin.

2. The Publisher's integrated Robotic Disc Transporter will

first check your recorder drive for a disc by attempting

to"pick" from the recorder. Then, the Robotic Disc

Transporter will pick a disc from the Input Bin.

3. The Recorder Tray opens automatically and the Robotic

Disc Transporter places a disc into the recorder. After the

disc is placed in the recorder, the Robotic Disc Transporter

checks the input stack to "see" if two discs were picked.

4. The Recorder Tray then automatically shuts. If a disc does

not record properly (meaning that all or part of that disc is

not recordable), the Robotic Disc Transporter picks it out of

the

CD Tray

and sends it to the Output Bin.

5. The Recorder is now writing to the disc. If you were to

fully record a CD with data, audio, video or music (650

MB), recording time is about 3 ½ minutes each. A full DVD

records in about 7-15 minutes depending on the speed of

the media to which you are recording. Most jobs don't fill

the entire disc, so recording time is usually less than this.

After recording, the Recorder Tray opens automatically.

The Robotic Disc Transporter will lift the disc out of the

Recorder Tray. The Recorder Tray will close, and the

Printer Tray will open. The Robotic Disc Transporter will

lower the disc into the Printer Tray, and the Printer Tray

will then automatically close.

6. If publishing more than one disc, the Robotic Disc

Transporter will load the Recorder Drive with a blank disc

from the Input Bin to start recording the next round.

510963.qxd 7/17/2006 11:04 AM Page 6

TOC

INDEX