Primera Technology Bravo Disc Publisher Automated Optical Disc Duplication & Printing System SE Benutzerhandbuch

Maintenance and Troubleshooting

Section 5: Maintenace and

Troubleshooting

A. INTERPRETING THE PUBLISHER’S INDICATOR LIGHTS

The Power/Ink button can tell you what is happening inside

the Publisher. Please refer to the following:

Power/Ink Button

Publisher

Fast Flashing

The Publisher is initializing.You will see this

pattern when the Publisher is first turned on.

Wait until the lights stop blinking before

opening software or starting jobs.

Slow Flashing

The cover is open and the ink cartridge carrier

is in change position. Insert a new cartridge

and close the cover. (The slow flashing light

can also indicate an out of media condition,

a robotic error or a picking problem. However,

these conditions are always paired with a error

message on screen.)

B. CLEANING THE PUBLISHER
NOTE: Do NOT attempt to oil or grease the Publisher's Robotic Arm shaft

or other components. You will likely cause more harm than good!

Any moving parts are designed to operate for the life of the machine

with no additional lubrication required.

Use a clean, lint-free rag with a small amount of ammonia

window cleaner to clean the Publisher's outside case and

trays. This type of cleaner is very effective on inks that may

accumulate on the printer tray. Stronger cleaning solutions are

NOT recommended because they may damage the paint and

plastic materials from which the parts are manufactured.

Always disconnect your Publisher's power cords before

cleaning. Resume operation only after the surfaces are

completely dry.

510963.qxd 7/17/2006 11:05 AM Page 44

TOC

INDEX