Philips CF-U1 Benutzerhandbuch

You can set a start-up password to protect your computer from unauthorized use.

z

If the Supervisor Password or User Password has been set, the password input screen will be displayed on starting-up 
of the Setup Utility even though [Password on Boot] is set to [Disabled].

The flash memory lock function protects the flash memory data from being read or written when the flash memory is attached 
to another computer. The data can be read/written when the flash memory is returned to the original computer.

z

For the data being read/written on the original computer, the Setup Utility settings must be the same as when the flash 
memory was removed.

z

You cannot use the flash memory lock function without setting the Supervisor Password. Set the Supervisor Password 
beforehand (

z

When you have your flash memory drive repaired
• Contact Panasonic Technical Support.
• Before sending back the flash memory drive, be sure to set the [Hard Disk Lock] to [Disabled].

z

The flash memory lock function works with the built-in flash memory. It does not work with the external hard disk.

z

We recommend you to set [Password on boot] to [Enabled] to ensure security though it is not required to enable the 
flash memory lock. (Note that the flash memory lock does not guarantee complete protection of the data.)