Telus Modem IR1200 Benutzerhandbuch
iR1200 Modem
33
Extended Result Codes [ATx]
This command provides an extended result code selection.
Command
X
Action ATx <setting>
Query AT&v
Range
Parameter
Values:
0, 1 = The modem does not return the BUSY or NO
DIALTONE result codes.
DIALTONE result codes.
2 = The modem might return the NO DIALTONE
result code if appropriate, but does not return the
BUSY result code.
result code if appropriate, but does not return the
BUSY result code.
3 = The modem may not return the BUSY result code,
if appropriate, but does not return the NO
DIALTONE result code.
if appropriate, but does not return the NO
DIALTONE result code.
4 = The modem may return either the BUSY or NO
DIALTONE result code, if appropriate.
DIALTONE result code, if appropriate.
Restore User Defaults [Atz]
This command causes the modem to reset all parameters and S-registers to their user-defined default values. There are three
sets of user defaults (or images). The parameter selects between which image is being requested.
sets of user defaults (or images). The parameter selects between which image is being requested.
Command
Z
Action Atz <image>
Query
Range
Parameter
Values:
0 = Local user image 0
1 = Local user image 1
2 – Local user image 2
DCD Behavior [AT&c]
This parameter determines how the DCD line relates to the detection of received line signals from the distant end.
!
Changing the parameter takes effect immediately in
both the command and online command states.
both the command and online command states.
Command
&C
Action AT&c <setting>
Query AT&v
Range
Parameter
Values:
0 = DCD always on
1 = The modem turns on the DCD to indicate the
presence of a connection, and turns off the DCD to
indicate the loss of connection.
presence of a connection, and turns off the DCD to
indicate the loss of connection.