QMS 1800486-001C Benutzerhandbuch
1.%7 %
$
.
$
- '
3
Check that the correct paper type is used.
See appendix B, “Technical Specifications,” for media specifications.
4
Check the printer for residual jammed media.
5
Remove any jammed media remaining inside the printer by checking the
locations described in chapter 7, “Media Jams.”
locations described in chapter 7, “Media Jams.”
6
Remove the media and load fresh media from an unopened package.
,
&#
Caution:
The OPC belt is extremely sensitive to bright light and direct sunlight.
Always leave it in its protective bag until you are ready to install it. Any exposure to
light should be limited to less than two minutes or permanent damage could result. If
you suspect the belt is damaged due to exposure to light, put the belt in a dark place
to recover. Depending on the amount of exposure, recovery may take up to two hours.
Recovery time is dependent on the amount of exposure sustained, and recovery is not
guaranteed.
light should be limited to less than two minutes or permanent damage could result. If
you suspect the belt is damaged due to exposure to light, put the belt in a dark place
to recover. Depending on the amount of exposure, recovery may take up to two hours.
Recovery time is dependent on the amount of exposure sustained, and recovery is not
guaranteed.
If you experience the following print quality problems, they may be pointing to the OPC
belt cartridge.
belt cartridge.
Lightly stained background
Edge of the image is missing
Partially uneven optical density image periodically
White or black vertical lines
Banding lines and uneven color density
White or black spots
Misregistration of color occurring between overlapped colors
Try the following:
1
Perform routine user cleaning on your OPC belt cartridge.