QMS 1800486-001C Benutzerhandbuch
$
1
.
.
#
-
3
Flex the envelope stack (including the edges) to
remove any stiffness.
remove any stiffness.
4
Correct any dog-eared corners, and then tap the
envelopes on a flat surface to align them.
envelopes on a flat surface to align them.
5
Remove the media cassette from the printer (and remove any media in the
cassette).
cassette).
6
Adjust the media guides to the length and width of the envelopes.
Squeeze the retainers at the ends of the left width guide and/or the length guide,
move the guide to the appropriate location (media sizes are listed on the cassette),
and release the retainers.
move the guide to the appropriate location (media sizes are listed on the cassette),
and release the retainers.
»
Note:
Make sure the guides are snug enough to keep the envelopes straight, but
not so tight that they buckle the envelopes.
7
Place the envelope stack into the cassette with the printing-side up.
»
Note:
Check your application documentation to determine if the flap should be
placed on the left or on the right. You can also print a single envelope to check the
orientation before printing multiple copies.
orientation before printing multiple copies.
8
Insert the cassette into the printer.
The media cassette must be located in the upper input feeder.