Netgear LG6100D Betriebsanweisung
Software and Reset
112
To reset device settings:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Software and Reset.
5. Below Settings Reset, click Reset.
6. Click Begin Reset.
Reset the Gateway to Factory Default Settings
In some cases you will need to reset your device’s software to its factory default settings.
WARNING: If you reset the software to default settings, you must go through the device setup,
as if you’ve just purchased your device. (See
as if you’ve just purchased your device. (See
You’ll need to reset the software to default settings if:
●
You’ve forgotten the administrator password.
●
You’ve changed the DHCP settings such that your device is inoperable. (For example,
there’s no communication with your device.)
there’s no communication with your device.)
You can reset your device to factory settings from the gateway’s Software and Reset page.
Note: All connected devices will be disconnected and your device will reboot automatically.
To reset the gateway to its factory settings:
Note: You need Sprint’s assistance to do a factory reset of your device. Contact Sprint
Customer Service to obtain an SPC code that you will need to enter to perform the reset.
Customer Service to obtain an SPC code that you will need to enter to perform the reset.
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Settings > General > Software and Reset.
5. Below Factory Reset, click Reset.