Bravetti F1066 Benutzerhandbuch

Always remove the plug 

from the wall socket before cleaning.  
Allow the deep fryer and the oil to cool 
completely (approximately 2 hours) 
before cleaning.  Never immerse the 
control panel, cord or plug in water or 

any other liquid.

• 

Follow the cleaning instructions on 
page 4. (Before using for the First 
Time)

• 

Never immerse the control panel, cord 
or plug in water or any other liquid.

• 

Do not place the control panel, cord or 
plug in the dishwasher.

• 

Clean the control panel only with a 
damp cloth.

• 

The oil container, frying basket, lid 
cover and filter can be washed in the 
dishwasher.

• 

The body of the deep fryer can be 
washed in warm soapy water.  Do not 
put the body of the deep fryer in the 
dishwasher.

Your Bravetti Platinum Pro  Deep Fryer 
has been specifically designed with your 
safety in mind. Bravetti Platinum Pro 
has incorporated a unique detachable 
power supply cord.  This power supply 
cord cord is designed to “Break Away” 
from the fryer body in the event that the 
supply cord is inadvertently pulled.  This 
is intended to prevent the tipping of the 
appliance and hazardous spillage of hot 
oil.

The female receptacle portion of the 
power supply cord is permanently 
attached to the rear of the the control 
panel. To connect the male power cord 
plug to the female receptacle on the 
appliance, orient the male plug so that it 
mates with the female receptacle. The 
male plug can only be inserted one way. 
If the male plug will not go into the 
receptacle on the appliance, rotate the 
male plug 180° and insert again.

IMPORTANT: Should the male plug 
become detached from the appliance 
during use, it is important to:
1.  Unplug the power cord from the wall 

outlet.

2.  Turn off the appliance at the control 

panel.

3.  Re-attach the power cord to the 

appliance.

4.  Re-connect to power outlet.
5.  Turn the appliance back on.

Your deep fryer is equipped with a special Auto-Off Safety Feature. The 
heating element will shut off when the timer stops.

You can re-set the deep fryer to 320 degrees by simply pressing the re-set 
button located just below the thermostat on the front panel.

The temperature control allows you to set the desired temperature for each 
recipe. Once the temperature is achieved, the ready light will turn on. This is 
the point to set your timer. Once the time has elapsed, the element will shut 
off and the oil begin to cool down. If you want to do another recipe, simply 
press the re-set button, set your temperature and wait for the ready light. 
Once illuminated, then set the timer.

If you would like to use the fryer continuously for multiple batches, do not 
set the timer. Simply set the desired temperature, wait for the ready light 
and begin!