John Deere OMPC20964 Benutzerhandbuch
Original GreenStar Display—StarFire iTC
OUO6050,0002260
–19–14NOV06–4/5
7
4
1
0
5
2
9
6
3
.
8
CLR
SETUP
PAGE
RUN
INFO
SETUP
JOHN DEERE
Position vehicle in the
opposite direction at
the same location.
opposite direction at
the same location.
Press continue when ready.
TCM
A
B
C
D
E
F
G
Cancel
Continue
PC9563
–UN–06NOV06
TCM calibration complete
A——
B—Position Vehicle in the opposite direction at the
B—Position Vehicle in the opposite direction at the
same location.
C—Press continue when ready.
D——
E——
F—Continue
G—Cancel
D——
E——
F—Continue
G—Cancel
NOTE: While calibrating, TCM will provide a warning if it
detects vehicle roll angle is greater than 10
°
relative to internal axis of TCM. If vehicle is on a
level surface and yet warning is displayed, check
mounting orientation of TCM and verify it is
aligned within 10
level surface and yet warning is displayed, check
mounting orientation of TCM and verify it is
aligned within 10
° of vehicle axis.
2. Turn vehicle 180
° to face opposite direction. Ensure
that tires are in proper location for fixed or floating front
axle.
axle.
3. Ensure vehicle has come to a complete stop (cab is
not rocking) and Press letter button next to
CONTINUE.
CONTINUE.
Continued on next page
25-14
121907
PN=73