LXE Home Security System VX-7 Benutzerhandbuch

 

 

The Input Panel is disabled by default.  To enable the Input Panel, select Start | Settings | 

Control Panel |Input Panel icon.  Make sure the “Allow applications to change the input 

panel state” checkbox is checked and warmboot the VX7. 

Vehicle power input for the VX7 is 12V to 80V DC and is accepted without the need to perform 

any manual adjustments within the VX7. See the section titled “Installation”, sub-section titled 

“Vehicle 12-80V DC Direct Connection”.  An optional Uninterruptible Power Supply (UPS) 

battery pack is available for the vehicle power supply connection.  
If 12V to 80V DC power is not available – for example, in an office environment – an optional 

external Input Power Supply can be used to convert AC wall power to an appropriate DC level. 

See the section titled “Installation”, sub-section titled “External Power Supply”. 
Power input is fused for protection and the fuse is externally accessible. See section titled 

“Installation”, sub-section titled “Fuse Replacement for the VX7”. 

An optional Uninterruptible Power Supply (UPS) battery pack is designed to provide power to 

the VX7 for short periods of time when vehicle power is unavailable (such as when vehicle 

batteries are swapped).  Fully charged, the UPS battery powers the VX7 for a minimum of 15 

minutes at 25º C (77º F) ambient temperature. 
The Power Status LED on the VX7 indicates the UPS battery status: 

 – Running on 12V – 80V power input 

 – Running on UPS battery, battery is not low on power 

 – Running on UPS battery, battery is critically low.