LXE Home Security System VX-7 Benutzerhandbuch
4.
Hardware (not shown):
Screws, 8-32x5/8 (4 each) for use with the 95 key keyboard
Screws, 10-32x5/8 (4 each) for use with the 60 key keyboard
Bolts, 1/4-20x5/8 (3 each)
Washers, 1/4 locking (3 each)
Washers, 1/4 flat (3 each)
Screws, 8-32x5/8 (4 each) for use with the 95 key keyboard
Screws, 10-32x5/8 (4 each) for use with the 60 key keyboard
Bolts, 1/4-20x5/8 (3 each)
Washers, 1/4 locking (3 each)
Washers, 1/4 flat (3 each)
Torque Measurements
You will need a torquing tool capable of torquing to 50 inch pounds (5.64±.56 N/m).
Torque all screws and bolts according to the following table:
Torque all screws and bolts according to the following table:
For these screws and bolts…
Torque to
1/4 bolts
50.0±5 in/lb (5.64±.56 N/m)
Procedure
Step 1 – Mount Vehicle RAM Mount Bracket
1.
Determine the position for mounting the RAM ball base. Be sure to position the RAM bracket
to allow access to the switches and ports on the bottom of the VX7.
to allow access to the switches and ports on the bottom of the VX7.
2.
Attach the RAM ball base to the vehicle mounting surface using four 1/4 bolts (or equivalent)
fasteners.
fasteners.
Note: ....... 1/4 Bolts not included.
IMPORTANT
:
Mount to the most rigid surface available.