LXE Home Security System VX-7 Benutzerhandbuch

 

 

the “Vehicle Remote Mount Antenna Installation Sheet” for details. 

If the internal antenna option is ordered, an antenna is mounted on the inside of the user 

access panel cover.   
The internal antenna assembly has two antenna cables.  Attach the antenna cables to the 

radio card.  When this process is complete, reattach the access cover screws using a torque 

wrench capable of measuring to 9±1 inch pounds force (1.016±.11 N m). The screws must be 

fastened to 9 inch pounds each.  The screws require a Phillips size 1 driver head. 

Refer to the documentation received with the barcode scanner for complete instructions. Read 

all warnings and caution labels. 
Before using the scanner, read section titled “Operation”, sub- section titled “Laser Barcode 

Scanner Warnings”. 
Pin 9 of COM1 is configured to provide +5V.  To change Pin 9 of the port, please refer to 

Chapter 4, “System Configuration” in the “VX7 Reference Guide”. 
The scanner cable is attached to the connector labeled “COM1/SCANNER”. The scanner 

receives power from the VX7. 
The cable requires a nine-pin D-shell female connector for the VX7. 

1. 

Power off the VX7 before connecting the scanner cable to the VX7. 

2. 

Seat the connector firmly over the pins and turn the thumbscrews in a clockwise direction. Do 
not overtighten. 

3. 

Use a strain relief clamp to secure the cable. 

4. 

Press the power button to power up the VX7. 

 
When you have finished using the scanner, remove it from the VX7 and store the scanner in a