LXE Home Security System VX-7 Benutzerhandbuch

 

 

The VX7 provides an external headset connection via an audio jack connector labeled “Audio”.  

The audio jack accepts a headset with a 2.5mm plug, such as a mono headset with 

microphone or a stereo headset.  Please refer to the VX7 Reference Guide for information on 

configuring the audio port for a mono headset with microphone or a stereo headset. 

1. 

Insert the speaker or headphone plug into the audio connector; making sure the plug is 
firmly seated in the audio jack. 

2. 

Replace the plug when the speaker or headset is removed from the audio jack. 

3. 

Use a strain relief clamp to secure the cable. 

1. 

Turn the VX7 off before attaching the power plug. 

2. 

Connect the power cable to vehicle power (See the following section titled “Vehicle 12-80VDC 
Direct Connection”.) 

- or - 

to an AC adapter. (See the following section titled “External Power Supply”.). 

3. 

Several possibilities are available for routing the vehicle power to the VX7.  See the following 
section titled “Vehicle 12-80VDC Direct Connection” for details. 

4. 

All plugs and receptacles are keyed and care must be used when connecting the cables. 
Tighten the nut of the plugs clockwise until tight. 
Secure the cable with the strain relief cable clamps. 

5. 

Turn the VX7 on.