LXE Home Security System VX-7 Benutzerhandbuch

 

 

• 

The cursor begins to flash in the field.  

• 

The unit is ready to accept data from either the keyboard or a device connected to a serial 

port. 

A right click can be simulated on the touch screen.  To perform a right click, touch the touch 

screen with the stylus and hold it in the same location for a short time. 

The following section is directed toward a generic tethered scanner connected to the COM1 

serial port on the VX7. 

Aim the scanner 

 from you, direct it at the barcode and press the trigger to scan.  

The Scan On LED (or equivalent) turns red to indicate the scanner is on. 
Adjust the aim so that the thin, red laser beam covers the entire length of the barcode.  
Some scanners use a laser aiming beam which then spreads into a wide beam when the 

scanner’s Aiming Beam Timer expires. Place the aiming beam in the center of the barcode and 

hold the scanner steady until the beam spreads and the barcode is decoded. Beeps may be 

heard as the barcode is decoded. Refer to the barcode scanner user’s guide for information on 

the Aiming Beam Timer and beep sequences, and the TE reference guide for host generated 

beep sequences. 
The scan beam must cross every bar and space on the barcode. 

Large barcodes can be scanned at the maximum distance. Hold the scanner closer to small 

barcodes (or with bars that are very close together).