LXE Home Security System VX-7 Benutzerhandbuch

 

 

This section’s instructions are based on the assumption that your new system is pre-

configured and requires only accessory installation (e.g. antenna, external keyboard and/or 

barcode scanner) and a power source.  
Use this guide as you would any other source book -- reading portions to learn about the VX7, 

and then referring to it when you need more information about a particular subject. This guide 

takes you through installation and operation of the LXE VX7. 
In general, the sequence of events is: 

1.  Install Vehicle Mounting Bracket on vehicle and secure VX7 in Mounting Bracket 

Assembly (see “Installation”, later in this manual). 

2.  Connect power cable to the VX7.  The power cable can also be connected to a UPS 

battery pack, which is then connected to the VX7. 

3.  Connect accessories to VX7, e.g. scanner, antenna, etc.  
4.  Secure all cables to the VX7 with the Strain Relief Cable Clamps. 
5.  Turn the VX7 on. 
6.  When instructed, calibrate the touchscreen. 
7.  The screen may appear white while applications and drivers are loading.  When 

complete, set Date and Time (see the “VX7 Reference Guide”). 

8.  Configure radio (see the VX7 Reference Guide”). 
9.  Warmboot to ensure all registry settings are saved. 

Device is ready for use. 
The VX7 and its keyboard should be mounted in an area in the vehicle where it: 

• 

Does not obstruct the vehicle driver’s vision or safe vehicle operation. 

• 

Can be easily accessed by anyone seated in the driver’s seat. 

If your VX7 has AppLock installed, please contact your system administrator for setup and 

processing information. 
AppLock is configured by an administrator to limit general users to only certain programs.