LXE VX6 Benutzerhandbuch

Seite von 380
Backup VX6 Files using ActiveSync 
129 
E-EQ-VX6RG-J 
VX6 Reference Guide 
Create a Communication Option 
1.  On the VX6, select Start | Settings | Control Panel | Network and Dialup Connections. A 
window is displayed showing the existing connections. 
2.  Assuming the one you want does not exist, double-click Make New Connection.  
3.  Give the new connection an appropriate name. Click the Direct Connection radio button. 
Click the Next button.  
4.  From the popup menu, choose the port you want to connect to. Only the available ports are 
shown. 
5.  Click the Configure... button. 
6.  Under the Port Settings tab, choose the appropriate baud rate. Data bits, parity, and stop bits 
remain at 8, none, and 1, respectively. 
7.  Under the Call Options tab, be sure to turn off Wait for dial tone, since a direct connection 
will not have a dial tone. Set the timeout parameter (default is 90 seconds). Click OK. 
8.  TCP/IP Settings should not need to change from defaults. Click the Finish button to create 
the new connection.  
9.  Close the Remote Networking window. 
10.  To activate the new connection select Start | Settings | Control Panel | PC Connection and 
click the Change button. 
11.  Select the new connection. Click OK twice. 
12.  Close the Control Panel window. 
13.  Connect the desktop PC to the VX6 with the appropriate cable. 
14.  Click the desktop Connect icon to test the new connection. 
You can activate the connection by double-clicking on the specific connection icon in the Remote 
Networking window, but this will only start an RAS (Remote Access Services) session, and does 
not start ActiveSync properly.