Lowrance electronic PRO X51 Benutzerhandbuch

23 

In normal operation, the sonar chart will scroll from right to left across 
the screen. You can stop the chart from scrolling across the screen. This 

is useful when you want to "freeze" the picture to study it more closely. 

To stop the chart, press 

 until the 

menu appears. Use 

the 

to select 

. The menu remains visible and a 

stationary "Stop" message appears in the screen's top right corner. 

To resume scrolling, use the 

to select 

 (or any speed 

other than minimum), then press 

 to clear the menu. For most 

fishing conditions you should return the chart to maximum speed. 

(Read more about this in the later entry on Chart Scroll Speed.) 

You cannot clear the menu until you raise the chart speed again. If 
you accidentally press 

 to clear the menu while the chart is 

stopped, you must press 

 until the 

menu 

reappears, then follow the instructions from the preceding 
paragraph. 

This shows all echoes scrolling across the full screen. This is the default 

page. The bottom signal scrolls across the screen from right to left. The 
line at the top of the screen represents the surface. The bottom depth 

(as determined by the digital sonar) shows in the upper left corner. 

If the transducer with a built-in temperature sensor is connected, a 

digital display for water temperature will also be shown. This 

temperature display can be turned on and off. See the later entry on 
Temperature Size for off and on instructions. 

®