HP Cell Phone Accessories E6380-90019 Benutzerhandbuch
160
Chapter 6
Configuration - Screens and Control Fields
Setting the Date and Time
Turning Off User Messages
Configuring the Instrument
Setting the Date and Time
The Test Set has a built-in clock that keeps track of the date and time.
It is powered by an internal battery to keep it operating when the
instrument is off.
It is powered by an internal battery to keep it operating when the
instrument is off.
To set the date and time
Step 1. Access the INSTRUMENT CONFIGURE screen.
Step 2. Select the
Date
field and use the DATA ENTRY keys to enter
the date (MMDDYY -- October 31, 1997 = 103197).
Step 3. Select the
Time
field and use the DATA ENTRY keys to enter
the time (HH.MM -- 2:13 pm = 14.13).
Changing the Beeper’s Volume
The beeper alerts you to important operating and measurement
conditions. It beeps any time a message is displayed at the top of the
screen. These messages warn you of conditions such as exceeding the
RF input level or trying to set a field to an unacceptable value.
Therefore, it is recommended that you do not disable the beeper.
conditions. It beeps any time a message is displayed at the top of the
screen. These messages warn you of conditions such as exceeding the
RF input level or trying to set a field to an unacceptable value.
Therefore, it is recommended that you do not disable the beeper.
To change the beeper’s volume
Step 1. Access the INSTRUMENT CONFIGURE screen.
Step 2. Select the
Beeper
field to display the volume choices.
Step 3. Select the desired choice.
Turning Off User Messages
To turn off user messages
Step 1. Access the INSTRUMENT CONFIGURE screen.
Step 2. Set the
Display User Mssgs
field to
No
.
To display user messages
Step 1. Access the INSTRUMENT CONFIGURE screen.
Step 2. Set the
Display User Mssgs
field to
Yes
.
Main Menu