Havis-Shields C-TCB-3 Merkblatt
C-TCB-3-INST-1-05
SUB ASSEMBLY:
1. Confirm receipt of hardware and components.
2. Loosen or remove front inner and outer passenger seat bolts on vehicle.
2. Loosen or remove front inner and outer passenger seat bolts on vehicle.
INSTALLATION:
1. Mount C-TCB-3 into vehicle:
• Slide pole support assembly between front inner seat base mount and floor of vehicle.
• Loosely attached factory seat bolt.
• Loosely attached factory seat bolt.
• Slide universal support brace between front outer seat base mount and floor of
vehicle.
• Attach universal support brace and side support brace to welded tab on side of pole
support assembly and loosely attach using 5/16-18 Hex head bolt, washers and nylock
nut.
nut.
• Position assembly on passenger seat base and completely tighten factory seat bolts.
• Mount side support brace to vehicle using ¼” x ¾” Hex head lag bolts. A 3/16” pilot
• Mount side support brace to vehicle using ¼” x ¾” Hex head lag bolts. A 3/16” pilot
is required.
Note: When mounting side support brace to floor of vehicle, be sure to check for obstructions prior to
drilling or lag bolting to floor.
• Mount optional C-3090 computer-mounting platform to telescoping pole assembly
using hardware and instructions provided with C-3090.