Fluke Lawn Mower 2635A Benutzerhandbuch

Users Manual

5-8

Perform the procedure in Figure 5-4 to print the Review array, which consists of the last,
maximum, and minimum measurement values during the last scan, and previous scans if
the instrument configuration has not changed or the review array cleared. If the Review
array is blank (cleared), an error message is displayed with an audible "beep." If this
occurs, press 

C to exit the menu.

dir
LASt

Typical 

Required

Printing the Review Array.  Press the LIST key 
to open the List menu.  Select LASt (Last) to print 
out the Review array, which consists of the last, 
maximum, and minimum values from the most 
recent scan if the instrument configuration has 
not changed and the Review array has not been 
cleared.  Press ENTER key to print the 
measurements (see example below).  An 
ERROR message appears if the Review array is 
cleared (empty).

Date (Month/Day/Year)

of Last Recorded Scan

Channels

Time (Hours:Minutes:Seconds)

of Last Recorded Scan

Last Values

Error

16:51:47  07/21/94

CH    LAST VALUE      MAX VALUE       MIN VALUE

 0:    399.74  HZ      415.63  HZ     392.22  HZ

 7:   -013.91  VDC    -013.88  VDC   -013.95  VDC

12:    103.38 mVAC     103.38 mVAC    103.35 mVAC

14:    001.07  MX+B    004.74  MX+B   001.01  MX+B

15:    2.2451 kOHMS    2.2666 kOHMS   2.2395 kOHMS

20:    072.34  F       076.21  F      071.29  F

Maximum Values

Minimum Values

op57f.eps