Atari XL Benutzerhandbuch
The Last Word 3.0 Reference Manual
7-47
7.6 EXAMPLE MACROS
The best way to illustrate the creation of macros is with some useful examples.
DUAL FONT LOADER
When loading fonts into LW, only the font relevant to the current display mode is
normally loaded, i.e. if LW is in 80 column mode and you specify a font to load, only
the 80 column (.F80) font is loaded, while the 40 column font remains unchanged. You
can, however, load the “other” font by specifying the file extender when loading fonts.
For example, if LW
is in 40 column mode and you load the “MACRO.F80” font, the
underlying 80 column font will be loaded while the current 40 column font will remain
unchanged.
What if you wanted to load both the 40 and 80 column fonts at the same time? We can
write a macro which will function as a new command for loading both types of font.
We’ll put the macro on the <SHIFT+CTRL+O> keystroke, so create an empty file and
type <Shift+Esc>, then <Select+ Ctrl+O>. Then type <Shift+Esc>, <Select+=> to get
the assignment character. Now we can type the commands which actually make up
the macro.
The first thing we want to do is capture the name of the font set to load. We do this
using the Macro Ask command. So we type <Shift+Esc>, <Select+Ctrl+A> to get the
macro ask character. This is followed by the input prompt we wish to appear on the
screen. Type:
Font Set
Press <Return> to end the string. Next, we need to stop the macro issuing keystrokes
until the user has a chance to type the name of the font set and press <Return>. This
is done with the macro input command, so we type:
<Shift+Esc>, <Select+Ctrl+L>
Now press <Return> - this adds the <Return> which the macro will issue to terminate
the user’s input (when the user presses <Return> while the macro is suspended during
input, that <Return> is not issued to the input line: it merely tells the macro we have
finished entering text. That’s why we have to issue the <Return> character explicitly to
terminate text input to the macro ask command.
The string captured by the macro ask command is stored in the paste buffer. It’s stored
there because it allows the resulting text to be easily inserted into the document. We
can also place the contents of the paste buffer back into the input line of another
command, using the <CTRL+B> (Paste Buffer) command. That’s what we’re going to
do now: place the font name the user provided into the Load Font command’s input
line.
So the next character we need in the macro is <Shift+Esc>, <Select+Ctrl+N>. We then
type <Shift+Esc>, <Ctrl+B>, followed by .F80, and finally a <Return>. This simply adds
“.F80” to the name the user typed, signifying that we wish to load the 80 column font.
To load the corresponding 40 column font, we type the same line again, except that
this time we add “.FNT”.
unchanged.
What if you wanted to load both the 40 and 80 column fonts at the same time? We can
write a macro which will function as a new command for loading both types of font.
We’ll put the macro on the <SHIFT+CTRL+O> keystroke, so create an empty file and
type <Shift+Esc>, then <Select+ Ctrl+O>. Then type <Shift+Esc>, <Select+=> to get
the assignment character. Now we can type the commands which actually make up
the macro.
The first thing we want to do is capture the name of the font set to load. We do this
using the Macro Ask command. So we type <Shift+Esc>, <Select+Ctrl+A> to get the
macro ask character. This is followed by the input prompt we wish to appear on the
screen. Type:
Font Set
Press <Return> to end the string. Next, we need to stop the macro issuing keystrokes
until the user has a chance to type the name of the font set and press <Return>. This
is done with the macro input command, so we type:
<Shift+Esc>, <Select+Ctrl+L>
Now press <Return> - this adds the <Return> which the macro will issue to terminate
the user’s input (when the user presses <Return> while the macro is suspended during
input, that <Return> is not issued to the input line: it merely tells the macro we have
finished entering text. That’s why we have to issue the <Return> character explicitly to
terminate text input to the macro ask command.
The string captured by the macro ask command is stored in the paste buffer. It’s stored
there because it allows the resulting text to be easily inserted into the document. We
can also place the contents of the paste buffer back into the input line of another
command, using the <CTRL+B> (Paste Buffer) command. That’s what we’re going to
do now: place the font name the user provided into the Load Font command’s input
line.
So the next character we need in the macro is <Shift+Esc>, <Select+Ctrl+N>. We then
type <Shift+Esc>, <Ctrl+B>, followed by .F80, and finally a <Return>. This simply adds
“.F80” to the name the user typed, signifying that we wish to load the 80 column font.
To load the corresponding 40 column font, we type the same line again, except that
this time we add “.FNT”.