Applied Energy Products Dell Latitude C800 Benutzerhandbuch

Removing and Replacing Parts

F le x C ab l e

Remove the 6-mm screw that secures the display flex cable to the

strain relief, and then use the pull loop to remove the display flex cable

from the graphics card.

NOTICE: When reconnecting the flex cable, press down on both ends of the

connector, not in the middle. Pressing the middle of the connector can damage
fragile components.

Open the display and, from the back of the computer, remove the two

screws labeled with a “circle D” that secure the display assembly to the

bottom case assembly.

With the display in an upright position, lift the display assembly from

the bottom case assembly.

6-mm screw

strain relief

pull loop

flex cable

64mcwc11.book Page 29 Tuesday, April 3, 2001 9:58 AM