Whirlpool WTW4850XQ Benutzerhandbuch

1.  Shut off both water faucets. Disconnect and drain water     

inlet hoses.

2.  If washer will be moved during freezing weather, follow     

Winter Storage Care directions before moving.

3.  Disconnect drain from drain system and drain any  

remaining water into a pan or bucket. Disconnect drain 

hose from back of washer.

4.  Unplug power cord.
5.  Place inlet hoses and drain hose inside washer basket.
6.  Drape power cord over edge and into washer basket.
7.  Place packing tray from original shipping materials back 

inside washer. If you do not have packing tray, place heavy 

blankets or towels into basket opening. Close lid and place 

tape over lid and down front of washer. Keep lid taped until 

washer is placed in new location.

To reinstall washer after non-use, vacation, winter storage,  

or moving:

1.  Refer to “Installation Instructions” to locate, level, and  

connect washer.

2.  Before using again, run washer through the following   

recommended procedure:

To use washer again:
1.  Flush water pipes and hoses. Reconnect water inlet hoses. 

Turn on both water faucets.

2.  Plug in washer or reconnect power. 
3.  Run washer through Casual Cycles REGULAR to clean 

washer and remove antifreeze, if used. Use half the  

manufacturer’s recommended amount of detergent  

for a medium-size load.