Woodstock Wood Vises D2254-6 Benutzerhandbuch

-2-

D2254-6, D2303 Wood Vise Instructions

4. Attach the vise to the workbench with four #10 x

2" wood screws through the underside of the work-

bench, as shown in

Figure 4.

Note: If you're using a shim, make sure the wood

screws pass completely through the shim and secure

at least halfway into the workbench thickness, as

shown in Figure 5. You may need wood screws of a

different length than given in

Step 4 when using a

shim. Also, for added holding strength, attach the

shim directly to the workbench with wood screws

that are independent of the vise.

��

Figure 4. Attaching vise to workbench.

��

Figure 5. Attaching vise to workbench

with shim between vise and workbench.

Operation

Rotating the vise handle (

Figure 6) clockwise moves the

movable jaw toward the fixed jaw.

Rotating the vise handle counterclockwise moves the

movable jaw away from the fixed jaw.

D2256 Only: Tighten/loosen the bench dog finger screw

(

Figure 6) to adjust the height of the bench dog.

Figure 6. Operation controls of vise.

Maintenance

The painted parts of the vise can be cleaned with a damp

rag. If wood pitch has built up on the components, clean

this with a pitch dissolver or blade and bit cleaner.

Lubricate the leadscrew with a dry lubrication, such as

silicone or graphite, that will not cause sawdust to stick

to the threads.

If material becomes built up on the threads, clean thor-

oughly with a pitch dissolver.

Figure 7. Shop Fox wood-faced magnetic

jaw pads (Models D3127-D3133).

Accessories

Ask your Shop Fox dealer for the wood-faced magnetic jaw

pads shown in

Figure 7.

Handle

Bench Dog Finger Screw

(D2256 Only)