Star Micronics TUP452-24 Benutzerhandbuch

– 36 –

Regular maintenance is very important since minute debris of thermosensible paper sticking to the

platen may cause slipping of the paper feeder. Maintenance should be made as follows:

Generally, TUP series should be maintained every time after using 10 rolls of 8 inch ø Star Standard

Spec paper roll, or 5 km length.

Generally, TSP series should be maintained every time after using 35 rolls of 115mm ø Star
Standard Spec paper roll, or 5 km length.  

1. Make sure that the power supply is turned off before starting the maintenance procedures.

2. Wipe and rub the platen gently with a dry soft cloth to remove all debris stuck on the platen sur-

face. (Turn the platen around to remove debris from all the surface.)

*

Take enough care not to touch the gears and the cutter guide when wiping the platen to avoid any

bodily injury. 

*

Avoid wiping a same spot of the platen continuously, otherwise it may cause deformation of the

platen. 

*

Wash your hands thoroughly before touching the platen. 

Cutter guide

Platen

Dry soft cloth