Windows Marketplace V.90 Benutzerhandbuch

Do This First

Please read the following tips carefully before attempting to

install your new modem.

For W

INDOWS

NSTALLATION

If you are replacing the modem in your computer system with this modem, be

sure to remove all other modem drivers. Go to: Start-Settings-Control Panel

and double-click on the System icon. Select the Device Manager tab. Double-

click on the Modems icon in the device tree to show the modems installed.

Highlight each modem listed by clicking once on the icon next to the modem

and then click the Remove button. It is also a good idea to physically remove

your old modem from the system. Note: once you remove the old modem and

its drivers from your system, you will need the old modem driver diskette if

you wish to reinstall it at a later date. Close the System Properties window

and return to the Control Panel. Double-click on the Modems icon. If a New

Hardware Panel comes up, click Cancel. If your old modem is listed, high-

light the modem and click the Remove button. Shutdown and turn off the

computer. Wait 5 seconds before turning the system back on.

Figure 1: Win95 Modems Properties Panel

If you are going to use the TAM (Telephone Answering Machine) functions

of the modem, you need to install the Unimodem V components of Windows

95. If you have Windows 95 OEM Service Release 2 (Version 4.00.950 B or

above) you do not need to install this component as it is already built into the

operating system.