Wacom Intuos Benutzerhandbuch

     Page  120

•

Then press the tool’s eraser to the tablet—the S

WITCHES

 state and P

RESSURE

 value will change.    

(P

RESSURE

 should change from approximately 0% with no pressure applied to approximately 100% 

when full pressure is applied.)

•

For the airbrush, move the fingerwheel forward—the W

HEEL

 value should decrease to a value of 

approximately 0 when the fingerwheel is all the way forward.  Move the fingerwheel backward—the 
W

HEEL

 value should increase to approximately 1000 when the fingerwheel is all the way back.

4. Test tilt for the x-axis by moving the Intuos Pen or Airbrush from a vertical position toward the right; the 

X T

ILT

 value should change from approximately 0 to +60 (0 to +50 for Intuos 4x5 tablets).  Now move 

the tool to the left of vertical; the X T

ILT

 value should change from approximately 0 to -60 (0 to -50 for 

Intuos 4x5 tablets).

5. Test tilt for the y-axis by moving the Intuos Pen or Airbrush from a vertical position toward the bottom of 

the tablet; the Y T

ILT

 value should change from approximately 0 to +60 (0 to +50 for Intuos 4x5 tablets).  

Now move the tool toward the top of the tablet; the Y T

ILT

 value should change from approximately 0 to 

-60 (0 to -50 for Intuos 4x5 tablets).

6. When you are done, click on the C

LOSE

 button to exit the dialog box.