Raritan Computer PCR8 Benutzerhandbuch

Seite von 43
C
HAPTER 
3: I
NSTALLATION
 
13 
 
C
HAPTER 
3: I
NSTALLATION
 
Unpacking 
Compare the unit and serial number of the equipment to the number on the packing slip located on the outside of the box and 
make sure they match. Log the information on the worksheet in Appendix B: Equipment Setup Worksheet. Inspect equipment 
carefully. If there is damage to the equipment or if materials are missing, contact Raritan technical support at  
732-764-8886.  
 
 
 
Preparing the Installation Site 
The installation area should be clean and free of extreme temperatures and humidity. Allow sufficient space around the Remote 
Power Control unit for cabling and outlet connections. Please review the Safety Instructions listed in the beginning of this 
manual. 
 
 
RJ-45 Cables and Adapters 
Important! All Remote Power Control models have an RJ-45 port for connecting to a local EIA-232 device 
such as a computer terminal or external modem. Most serial computers do not have RJ-45 connections, 
therefore, an adapter (Raritan Part No. APCSDB9F) to convert from a DB-9 connector to an RJ-45 
connector and an adapter (Raritan Part No. APCSDB25M) to convert from a DB-25 connector to an RJ-45 
connector are included with each Remote Power Control unit. 
 
 
 
 
RJ-45 outlet 
 
RJ-45 plug 
 
 
 
 
APCSDB25M Adapter 
 
 
         APCSDB9F Adapter