Raritan Computer Paragon II 255-30-6000-00 Benutzerhandbuch
Switching between Previous and Next Channels
58
Instance 4: “B” user completely overlaps the path with “A” userʹs;
therefore, only the server 3‐2 connected to UMT‐3 is accessible to the “B”
user.
therefore, only the server 3‐2 connected to UMT‐3 is accessible to the “B”
user.
Switching between Previous and Next Channels
There are two ways for you to switch between active channels: one is
through the OSUI operation, and the other is through the “Up/Down
Channel” hot key combination, which enables quick access by bypassing
the OSUI. The availability of the “Up/Down Channel” function depends
on two requirements as described below.
through the OSUI operation, and the other is through the “Up/Down
Channel” hot key combination, which enables quick access by bypassing
the OSUI. The availability of the “Up/Down Channel” function depends
on two requirements as described below.
• The user station you operate must be “P2‐EUST” or “P2‐EUST/C”
with the following firmware version.
P2‐EUST: firmware version 3EB or later
P2‐EUST/C: firmware version 4EB or later
A P2‐UST does not support this feature.