Zonet Technology Zonet ZEW3003 Benutzerhandbuch
24
4.10 Advanced
Frag Threshold: Specify the maximum size of packet during the fragmentation of
data to be transmitted. Default value is 2346.
data to be transmitted. Default value is 2346.
RTS Threshold: When the packet size is smaller the RTS threshold, ZEW3003 will
not use the RTS/CTS mechanism to send this packet. Default value is 2347.
not use the RTS/CTS mechanism to send this packet. Default value is 2347.
Beacon Interval: The interval of time ZEW3003 broadcast a beacon. Beacon is
used to synchronize the wireless network. Default value is 100.
used to synchronize the wireless network. Default value is 100.
Transmit Rate: For different requirement, you can select one of the suitable Basic
Data Rates. Default value is Auto.
Data Rates. Default value is Auto.
Preamble Type
Long can provide better wireless LAN compatibility.
Short can provide better wireless LAN performance.
802.11g Protection: It also called CTS Protection. It is recommended to Enable
the protection mechanism. This mechanism can decrease the rate of data collision
between 802.11b and 802.11g wireless stations. When the protection mode is
enabled, the throughput of ZEW3003 will be a little lower due to many of frame
traffic should be transmitted
the protection mechanism. This mechanism can decrease the rate of data collision
between 802.11b and 802.11g wireless stations. When the protection mode is
enabled, the throughput of ZEW3003 will be a little lower due to many of frame
traffic should be transmitted
Wireless VLAN: Default value is Disabled.