Spectralink PTB450 Merkblatt

2005

Spectr

aLink

Cor

por

ation

P/N
72-0035-0

1-I

Model

PTB400,

PTB4
10,

PTB450

Spectr

aLink

Cor

por

ation

5755
Centr

Avenue

Boulder

, CO

8030

303.4

40.5330

800.67

6.5

465

www
.spectr

alink
.com

For more information about SpectraLink Wireless Telephones and

accessories, visit our website at http://www.spectralink.com/service/

manuals_link.html

NOTE

• Changes or modifications not expressly approved by SpectraLink could void

the user’s authority to operate the equipment.

• It is recommended that standard acceptance procedures be followed prior to

operating this equipment in proximity of life-support systems.

• To minimize risk of interference, pacemaker users should not carry the

Wireless Telephone next to the pacemaker.

• Earpiece may retain magnetic objects.
• Operation of the Wireless Telephone may produce an audible noise notice-

able to hearing aid users. It is recommended that a hearing aid compatible

headset be used by hearing aid users.

• This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful interfer-

ence, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Turn on

Place a call

Answer call

Put call on hold

Mute/unmute

microphone

Adjust volume

during call

Hang up

Turn off

Using the headset

Access system

features

Standby menu

Navigation

Volume Level

Ring Type

High Noise Mode

Extension

Backlight

Language

INSTRUCTIONS FOR USE

Press the PWR key for about one second. You will hear a double chirp.

Your extension will display. The NO SVC message will display briefly.

When it goes out, you are ready to make and receive calls.
Press the START key, wait for dial tone, then dial the number. Dial calls

with the Wireless Telephone exactly as with your desk phone. Your tele-

phone system may require you to select a line by pressing the LINE key,

followed by a line number.
The Wireless Telephone will ring or vibrate to alert you. Additionally, a

line indicator on the display may flash, and the display may show infor-

mation about the call, such as caller’s name and extension. To answer a

call, press the START key and hold the earpiece to your ear.
If you are on a call and hear subdued ringing, a call is coming in on a

second line. To answer this call, put your first call on hold and press the

line key then the line number of the second call.
Press HOLD.
To mute the microphone so you can hear but won’t be heard, press FCN

then press 1. MUTED appears on the Wireless Telephone display. Press

FCN

then 1 again to restore voice pickup.

Press VOL while you are in a call to toggle between high and low volume.

Press END. Do not use the PWR key to end a call, because that will turn

your Wireless Telephone off and you will not receive calls until you turn

the Wireless Telephone back on.
Press the PWR key for about one second. You will hear a single chirp.

If you accidentally turn your Wireless Telephone off during a conversa-

tion, you can restore your conversation by pressing the PWR key and

then the START key, provided the person you are talking to has not

hung up.
To hear ringing through a headset, the ring type must be set to SOFT.
To answer a call when your headset is plugged in, press any key except

PWR

or END.

The volume level can be adjusted separately for headset use. Plug the

headset in and press FCN until VOLUME displays. Use the keypad to enter

a volume level from 1 (softest) to 8 (highest). This sets the low volume.

High volume is automatically set two levels higher than low volume.

Toggle between high and low volume by pressing the VOL key while in

a call.
To access the features of your telephone system from the Wireless

Telephone, press FCN anytime while in a call to display a menu of avail-

able features. Press the key(s) for the desired feature, or press FCN again

to display more options. Select EXIT MENUS to exit.
If your telephone system supports softkeys, pressing FCN provides

access to softkey functions. You will need to press FCN twice to display

the feature menu.
Because softkey and system features vary, your system administrator will

explain them for your telephone system.

Setting User Preferences
When the Wireless Telephone is on but not in use, press and briefly

hold FCN to display menus. Check with your system administrator for

specific features supported by your Wireless Telephone.

to display next menu item.

to display previous menu item.

to select or change item.

to return to previous menu level.

to exit menus.

The Wireless Telephone has two volume levels, low and high. Set the

low volume level by pressing FCN until VOLUME displays. Use keypad to

select a level from 1 (softest) to 8 (loudest). This sets the low volume.

High volume is automatically set two levels higher than low volume.
Select Telephone Ring to set the standard ring on the Wireless Telephone.

Normal

is factory default. Vibrator Ring works only if your Wireless

Telephone has the optional vibrating ringer. Auxiliary Ring is used only

by external applications. Press 0 to select desired ring type. The ring

type currently set displays with an asterisk (*).
Adjusts the Wireless Telephone to account for background noise. Select

an option that describes the noise in your environment.
Sets extension number associated with your Wireless Telephone. Use

keypad to enter extension number.
Comes on when any key is pressed. Turns off after ten seconds if no

key is pressed. (Model PTB450 only.)
Sets the default language for Wireless Telephone menus. Select the lan-

guage to be used with your Wireless Telephone.

About Battery Packs

Indications of a low

Battery Pack

Removal and

replacement of the

Battery Pack

NO SVC

BATT

MSG

Battery Packs
The Wireless Telephone will need to have its Battery Pack recharged

periodically. The Nickel Metal Hydride (NiMH) rechargeable Wireless

Telephone Battery Pack gives you four hours of talk time or 80 hours

of stand-by time. Stand-by time is when the Wireless Telephone is

turned on, but you are not using it.
The Wireless Telephone also supports a Nickel- Cadmium (NiCd)

Battery Pack, which supports two hours talk time and 40 hours stand-by.
The Wireless Telephone will notify you when the charge on the Battery

Pack becomes low. If the Wireless Telephone is in use, the BATT message

will display and you will hear a soft beep through the earpiece every

six seconds. You have two minutes to complete the call or change the

battery.
The Battery Pack can be changed while the call is still in progress. Do

not press END. Quickly remove the discharged Battery Pack and replace

with a charged Battery Pack, press PWR, and then press START to resume

the call in progress.
If the Wireless Telephone is idle, you will hear a brief modulated ring

signal and the Low Battery message will display. Your Wireless Telephone

will not operate until you replace or charge the Battery Pack.
To remove the Battery Pack, press down on the oval button on the back

of the Wireless Telephone. Slide the Battery Pack toward the bottom of

the Wireless Telephone until it stops, then lift up.
To replace the Battery Pack, first properly align the top of the

Battery Pack with the arrows on the label on the back of the Wireless

Telephone. Gently press and slide the Battery Pack toward the top of

the Wireless Telephone until it snaps into place. You should not have to

force it against the Wireless Telephone.
Take care not to short the battery contacts on the Battery Pack with

metal objects such as coins, keys or paper clips. Shorting the contacts

can cause permanent damage.

Status/Tone Indicators
The Wireless Telephone cannot receive or place calls. You may be out-

side of the coverage area. Walk back into the covered area.
Your Battery Pack charge is low. You will also hear a beep in the ear-

piece. Your Battery Pack needs to be recharged.
You have a voicemail message.

Link Wireless Telephone

(Model PTB450 shown)

Link
Wireless

Telephone

��

��
��

��

�

��

� � � � � � � �

��