XBLUE Networks 45p SLT Benutzerhandbuch
Single Line Telephone User Guide
14
XBLUE Networks
Fo
rce
d In
te
d In
te
rc
om
T
on
e Ri
ng
requirement when the system is installed “behind” Centrex or PBX system. For easy access
it is recommended, in these two cases, the Flash feature code should be programmed onto
a Flexible Feature Button.
If Call Waiting service is provided, by the telephone company, the Flash feature to answer
a second incoming call while connected to another outside party.
Conditions
1.
The Flash code may be stored in any speed dial bin.
2.
The Flash code may be stored in the Last Number Redial buffer.
3.
Single line extensions must generate a hook-flash on the analog port then dial
#3
to
generate a hook-flash on a CO Line.
Forced Intercom Tone Ring
*
When an extension is in Hands Free - Voice Announce mode, intercom calls will not for-
ward, so the system allows callers to dial “
*
” to activate Forced Intercom Tone Ring
which allows callers to ring the extension.
Conditions
1.
When an extension leaves a Callback, the alert signal will ring.
Group Call Pickup
#54
See Call Pickup
Hold
A Single Line Telephone can place calls on hold by pressing a fixed “Flash” button or by
pressing the hook-switch.