Sears 486.24321 Benutzerhandbuch
4
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
cartON cONteNts
5
6
7
8
1
4
9
2
3
asseMBLY
tOOLs reQUIred FOr asseMBLY
(1) Pliers
(2)
(2)
7/16" Open or Box End Wrenches
(2)
1/2" Open or Box End Wrenches
(1)
Small Hammer
FIGUre 2
step 1:
(see FIGUre 1)
•
Turn the spreader upside down so that it rests on the
hopper.
hopper.
FIGUre 1
step 2:
(see FIGUre 2)
•
Remove lock nut from the middle bolt in the crossover
tube and shaft support plate. Leave the bolt in place.
tube and shaft support plate. Leave the bolt in place.
•
Assemble the short end of the hitch tube onto the
middle bolt and secure it with the same lock nut you
removed.
middle bolt and secure it with the same lock nut you
removed.
do not tighten at this time.
•
Assemble two hitch braces to inside of hopper frame,
one on each side, using two 1/4" x 1-1/2" hex bolts and
two 1/4" nylock nuts.
one on each side, using two 1/4" x 1-1/2" hex bolts and
two 1/4" nylock nuts.
do not tighten at this time.
•
Assemble the two hitch braces to the hitch tube using
a 1/4" x 1-1/2" hex bolt and a 1/4" nylock nut.
a 1/4" x 1-1/2" hex bolt and a 1/4" nylock nut.
do not
tighten at this time.
IMpOrtaNt: The hitch tube must attach to the side of
the crossover tube opposite the shaft support plate.
the crossover tube opposite the shaft support plate.
1/4" x 1-1/2"
HEX BOLT
HEX BOLT
CROSSOVER
TUBE
TUBE
HITCH BRACE
HITCH
TUBE
TUBE
SHAFT SUPPORT PLATE
MIDDLE
LOCK NUT
LOCK NUT
MIDDLE BOLT
HITCH BRACE
1/4" NYLOCK
NUT
NUT
1.
Hitch Tube (#44586)
2.
Flow Control Arm (#24859)
3.
Hitch Bracket (#23687)
4.
Flow Control Mount Bracket (#24855)
5.
Braces (2) (#23525)
6.
Flow Control Rod (#44469)
7.
Drive Wheel (#48865)
8.
Wheel (#46503)
9.
Hopper Assembly