Ricoh TRC-239 Benutzerhandbuch

12

you finish, disconnect the power supply from AC
power before you disconnect the power cord
from the TRC-239.

If batteries are installed for portable use, make sure

 inside the battery compartment is set to the

correct position (see “Using Batteries” on Page 7).

Follow these steps to connect the TRC-239 to AC
power.

1. Connect the Adaptaplug adapter to the power

supply’s cord, setting TIP to + (positive).

2. Plug the barrel plug into the 

TRC-239's 

jack.

3. Connect the other end of the power cord to your

vehicle’s cigarette-lighter socket.

4. Plug the power supply into a standard AC outlet,

then turn on the power supply before you turn on
the TRC-239.

Caution: To prevent damage to your TRC-239, you
must connect an antenna before you operate it.

Follow these steps to attach the supplied flexible an-
tenna to your TRC-239.

21-1628.fm  Page 12  Tuesday, January 25, 2000  9:30 AM