Ricoh FU62ED Benutzerhandbuch

8

Preparation

ˆ

Your scanner has a locking mechanism
to protect it during shipment or while you
move it.

Before you use the scanner, slide 

 on the bottom of the scanner

toward 

. To protect the scan-

ner’s mechanism when you move or
ship it, slide 

 toward

.

The scanner uses the supplied 12V,
1250-mA AC adapter for power.

You must use a Class 2
power source that supplies
12V DC and delivers at

least 1250 mA. Its center tip must be
set to positive and its plug must fit
the scanner's 

 jack. The sup-

plied adapter meets these specifica-
tions. Using an adapter that does
not meet these specifications could
damage the scanner or the adapter.

• Always connect the AC adapter to

the scanner before you connect it to
AC power. When you finish, discon-
nect the adapter from AC power be-
fore you disconnect it from the
scanner.

Plug the AC adapter’s barrel plug into
the 

 jack on the back of the scan-

ner, then plug the other end of the AC
adapter into a standard AC outlet. The
indicator on the front of the scanner
lights, indicating that the scanner is
turned on. 

Note: The scanning lamp under the
scanner's glass automatically remains lit
so you do not have to warm up the scan-
ner each time you want to scan. To con-
serve electricity and prolong the
scanner's life, the lamp automatically
turns off after a while.

To use your new scanner, you must in-
stall the supplied PaperPort software on
your computer then connect the scanner
to the computer.

The PaperPort software includes instal-
lation files and a User's Guide. This
guide provides more detailed informa-
tion about the PaperPort software's fea-
tures. You can read the guide while the
CD is running, or print a copy directly
from your hard drive to your printer. To
read the guide, click 

, 

,

then 

.

You do not need to turn off the computer
before connecting or disconnecting your
scanner. 

25-3050.fm  Page 8  Wednesday, February 16, 2000  9:42 AM