Pelco Coaxitron Receiver/Driver CX9000 Benutzerhandbuch

24

Pelco Manual C554M-A (5/98)

Latching
Fiberglass Box:

Two latches (accommodates padlocks - not supplied)

Anodized
Metal Box:

No latches. Two Phillips head screws open cover of box.

Painted
Metal Box:

Two latches (accommodates padlocks - not supplied)

Input Voltage

Fiberglass Box:

120 VAC, 60 Hz (jumper selectable for 230 VAC, 50 Hz)

Anodized
Metal Box:

120 VAC, 60 Hz (jumper selectable for 230 VAC, 50 Hz)

Painted
Metal Box:

230 VAC, 50 Hz (CE version models)

Fuse Protection:

See Figure 7, AC Input and Fuse Values

Power
Consumption
Receiver:

5 vA (120 VAC or 24 VAC)

Pan/Tilt Supply:

140 vA maximum (120 VAC)
50 vA maximum (24 VAC)

Lens Supply:

0-4 vA maximum

Camera Supply:

15 vA (typical)

Control Method:

15-pulse train (pulse width modulated) superimposed on the
video signal during the vertical blanking interval by the control
transmitter. Pulse train occupies one TV line period.

Pulse Amplitude:

Approximately 1 Vp-p added to video signal, 333 kHz nominal

Connectors:

Two BNC connectors for video input and output
One 37-pin AMP CPC for control output (mate supplied)
One adjustable PG-13 liquid tight gland connector for power

Input Video Level:

1 Vp-p nominal; 2 Vp-p maximum at less than 75 percent APL;
1.5 Vp-p maximum at 90 percent APL

System Bandwidth: Less than 2 dB down at 10 MHz (exclusive of cable)

Power Cord:

3-wire grounded, #18 AWG

Construction
and Finish:

Dark gray fiberglass box (Most outdoor models)
Anodized Aluminum box (Most indoor models)
Gray polyester powder coat Aluminum box (230 VAC CE
version models only)

Operating
Temperature:

-4° to  140°F (-20° to 60°C)