Panasonic Arbitrator 360 Bedienungsanleitung

16

•  Connect the power cable when all connections are completed. Be sure to read the 

instructions in the connector diagram on pages 21 through 23 and the operating 
instructions of the devices that will be connected.

•  Verify that recording is not in progress prior to disconnecting any cables from the 

recorder. Be sure to disconnect the power cable first, and then disconnect any other 
cables.

•  An incorrectly connected power cable could cause a fire or damage.  Be sure to 

connect the power cable correctly.

•  Be sure to consult your supplier and request installation and connection.
•  Connect the red (BATT) and white (SIGNAL) wires of the power cable via a fuse 

(7.5 A) having UL Listing.

  (The power cable is included in the separately sold Cable Kit.)
•  Connect the power cable from the passenger compartment fuse box. Use a 

commercially available automotive cable to provide power from the engine 
compartment to operate the recorder in the passenger compartment.