Panasonic AG-MX70 Informationshandbuch

Seite von 10
54
R1
R2
R3
R4
R5
[Setup] initial setting screen
[Audio Video Input] settings
These are used to set the audio and video inputs.
When [Setup] is selected using the rotary 2 control and
[Enter] is pressed, [OK?] appears so press [Enter] to change
to the setting mode.  Use [Shift] + [Enter] to cancel.
When [Default] is selected using the rotary 2 control and
[Enter] is pressed, [OK?] appears so press [Enter] to change
to the default setting.
When [V-Link] is selected using the rotary 2 control and
[Enter] is pressed, [OK?] appears so press [Enter] to change
operation so that the audio input is matched with the video
input.
Factory settings
Audio
Video
Input
Setup
Setup
Default
V-Link
Event
ME Time
Pattern
INT
00
E
10:00
F
3015
Wht
Audio Video Input Setup
Enter to EXIT
1
V S-1
Video
A S-1
Analog
2
V S-2
Video
A S-2
Analog
3
V S-3
Video
A S-3
Analog
4
V S-4
Video
A S-4
Analog
5
V S-5
Video
A S-1
Analog
6
V S-6
Video
A S-2
Analog
7
V S-7
Video
A S-3
Analog
8
V S-8
Video
A S-4
Analog
AUXin
Mic
Video
YC
Y Pb Pr
SDI
V S-1
V S-2
V S-3
V S-4
V S-5
V S-6
V S-7
V S-8
Mic
AUX2
Analog
SDI
A S-1
A S-2
A S-3
A S-4
Setting method
Press the button of the cross point to be set.  Alternatively, select the button of the cross point which is to be set using the
rotary 1 control.  The lamp of the selected button flashes, and the bus is automatically output to Preview.  When the cross
point has been selected using the rotary 1 control, the A bus is output to Preview.
Select V S-1, V S-2, V S-3, V S-4, V S-5, V S-6, V S-7 or V S-8 as the video input using the rotary 2 control.
Select [Video] composite, [YC], [Y Pb Pr] component or [SDI] using the rotary 3 control.
Except for [Video], the sources extend from S-1 to S-4 so [5] is changed to [1], [6] to [2], [7] to [3] and [8] to [4].  If the setting
operation is exited part of the way through, the settings performed so far will not be stored in the memory.  They are entered
using [Enter], and operation returns to the [Audio Video Input] settings.
Select A S-1, A S-2, A S-3 or A S-4 as the audio input using the rotary 4 control.
Select [ANALOG] or [SDI] using the rotary 5 control.
Video input combinations that cannot be set: S-5 to S-8 + YC/Y Pb Pr/SDI
Audio input combinations that cannot be set: Combination of SDIs with different source numbers
Example: SDI of S-1 for video and SDI of S-2 for audio
[Mic] or [AUX2] can be set for [AUXin] using the rotary 4 control.  The default setting is [Mic].
R1
R2
R3
R4
R5