Pelco Genex Series Multiplexer MX4004 Benutzerhandbuch
Pelco Manual C1995M-A (10/01)
13
CONNECTING MONITORS
Refer to Table A for the type of video coaxial cable to use.
Main Monitor – Connect the video input of your monitor to the multiplexer’s MAIN output
using standard BNC connector and coaxial cable. If your color monitor supports SVHS, you
can use a special SVHS cable between your monitor and the multiplexer.
using standard BNC connector and coaxial cable. If your color monitor supports SVHS, you
can use a special SVHS cable between your monitor and the multiplexer.
Spot Monitor (Optional) – Connect your spot monitor to the SPOT output.
NOTE:
Skip this step if you
are connecting your multi-
plexer to an MX4000SVR or
to a CM6700 SCU.
plexer to an MX4000SVR or
to a CM6700 SCU.
Cable Type*
Maximum Distance
RG59/U
750 ft (229 m)
RG6/U
1,000 ft (305 m)
RG11/U
1,500 ft (457 m)
* Minimum cable requirements:
75 ohms impedance
All-copper center conductor
All-copper braided shield with 95% braid coverage
All-copper center conductor
All-copper braided shield with 95% braid coverage
Table A. Video Coaxial Cable Requirements