Tektronix Camcorder 2200 Benutzerhandbuch

3-29

2.

Select the type of category to be assigned (Misc, Keyframe 
Effects, etc.) by pressing the appropriate soft button.

3.

Turn the

 knob to assign a specific function 

(Aux Tally, etc.).

4.

After the desired function has been selected for each GPI, 
press 

 to enter the selection, which is indicated in 

the display table.

The following categories are available for assignment:

 — Enables selection of the Aux Tally Back function, or 

allows the selected GPI input to be disabled.

 — Allows an external device to control the aux bus 

tally level (high or low). The

soft knob selects the 

appropriate aux bus.

 — Causes any signal applied to the selected GPI 

input to be ignored.

 — Enables selection of the Keyframe GPI function. 

The following transitions may be triggered with GPI pulses:

■

, and 

 — Enables selection of the Auto Transition GPI 

function. The following transitions may be triggered with GPI 
pulses:

■

, 

, and

 — Enables selection of the Cut GPI function. The following 

cuts may be triggered by the GPI:

■

, and 

 — Enables selection of the E-MEM GPI function. The 

following E-MEM functions may be triggered by the GPI:

■

, and 

. The

 

soft knob selects the register for E-MEM recalls.

 — Enables selection of the Frame Store GPI 

function. Triggerable functions are as follows:

■

, and

Press 

 twice to return to the Configuration Menu.